#F58609 CP Grinding Shield Assembly with Ratchet Headgear, Clear
$35.16
1 In Stock
Complete grinding shield assembly with ratchet headgear. Lightweight design for maximum comfort. Meets ANSI Z87.1 Safety Standards.
Product Specifications:
Shield Measures: 15-1/2" (393.7 millimeters) by 8" (203.2 millimeters)
Headgear features push and turn ratchet sizing adjustment
WARNING! NOT TO BE USED FOR OXY-ACETYLENE WELDING
WARNING!:
According to current ANSI standards, face shields are considered secondary protection requiring the use of protective eyewear or goggles as well.
Since the shield does not fully enclose the face, protective eyewear should also be worn to safeguard eyes.
Face shield visors are NOT shatterproof.
When large objects and/or objects traveling at high rates of speed strike face shields, the visor may break or become compromised and cause injury to the wearer’s face or eyes.
Workers should avoid areas where such hazards exist or use extreme caution if they can’t be avoided entirely.
Routinely check face shields for damage, and do not wear a face shield that has sustained damage.
Workers performing tasks in which flying sparks or particles are present should wear protection to shield their face and head.
Visors/face shields do not reflect infrared heat (IR).
They are not recommended for use against radiant heat hazard including but not limited to welding applications.
