(15 minutes)
Had to bend it out a bit to fit my b2601,and had to buy 4 bolts washers and nuts. Used stainless and my lock nuts.
4/23/2024 BRIMFIELD, MA jim
(15 minutes)
7/6/2023 LAKE CHARLES, LA Kevin
Unrated
(15 minutes)
Easy and straightforward
6/8/2023 CHESTER, IL Darrell
Unrated
(15 minutes)
make a note on the website or put a piece of paper in the box with the step that says 5/16 x 3/4" bolts (4 each) with lock washers and nuts are needed for the installation.
1/10/2023 LINCOLN, NE Nate
Unrated
(20 minutes)
The step is great. I'm 280lbs, climbed on/off Kubota B2601 a few dozen times consecutively. It held up great. 2 popular online sites, not Messick's, said this model (6A700-51350) would fit. It did...with a little help. 1) I had to drill out the predrilled holes - the paint would not let the bolt thru. And 2) I had to stretch it about 2 1/2". Otherwise, a great mod!!!
12/14/2022 EAST BALDWIN, ME David
(20 minutes)
Very easy to install. Used locktite on bolts along with lock washers .
5/7/2022 CORUNNA, MI Roger
Unrated
(5 minutes)
None, it was a perfect fit. Took about five minutes.
4/11/2022 AUSTIN, AR noel
Unrated
(45 minutes)
Installed on B2601, simple bolt on procedure.
3/11/2022 Ozone, AR Joseph
(1 hour)
This step was super easy to install with the holes for the bolts already drilled and tapped on my B3030. I added an additional support to reduce the floor pan flex, but it wasn’t really necessary. The Kubota step was cheaper to buy than most after market steps.
Had to bend it out a bit to fit my b2601,and had to buy 4 bolts washers and nuts. Used stainless and my lock nuts.
BRIMFIELD, MA
jim