Land Pride OFM 36 Series

OFM 36 Series

Land Pride's Offset Flail Mowers offer hydraulic rightward offset adjustments, providing 22 inches of offset on the OFM26 and 49 inches on the OFM36. This offset measurement is taken from the tractor's center to the drive belt cover, enabling efficient mowing alongside fences, structures, or beneath trees. Both the OFM26 and OFM36 models are equipped with hammer knives featuring a 1-inch cut height and a 2-inch cut capacity. Their unique floating capabilities allow these mowers to gracefully adapt to varying terrain, ensuring a uniform cut even on sloped surfaces. With reverse rotor rotation, the cut material is carried upward and over the rotor, directing it downward to minimize the dispersion of debris. Furthermore, the mower deck boasts an operational range of 65 degrees, both upward and downward, making it an ideal solution for tasks such as maintaining ditches, road edges, and vineyards.

Ask a Question

Model Numnber: OFM3678 | OFM3690 | OFM3698

Horsepower Requirement: 75- 130 PTO HP

Mavhine Width: 78" | 90" | 98"

Hitch Type: Cat 2, 3-Point

HAMMER KNIVES:

Delivering a 1-inch cut height and an impressive 2.5-inch cut capacity.

FLOAT CAPABILITIES:

Distinctive float capabilities enable the mower to seamlessly conform to the terrain, with an operational range of up to 65 degrees in both upward and downward directions, ensuring a uniform cut on sloped surfaces.

REVERSE ROTOR ROTATION:

Efficient reverse rotor rotation propels the cut material upward and over the rotor, guiding it downward to effectively minimize the dispersal of debris.

HYDRAULICALLY OFFSET:

Hydraulically adjustable offset, extending 22 inches on the OFM26 and a substantial 49 inches on the OFM36. This offset measurement is taken from the tractor's center to the drive belt cover, facilitating precision mowing along fences, structures, or beneath trees.

OFM 36 Series

Other Flail Mowers

Flail Mowers