#1UTCO Orange Aluminum ROPS-Mount Canopy with Pivot Mount and Hardware

Curtis 1UTCO

Orange aluminum canopy with mount/pivot assembly and all hardware included. The mount/pivot assembly mounts to the vehicle ROPS (roll-over protective structure) in minutes. Lightweight canopy features integrated handles with quick-release latches for easy removal. Turn the canopy to the rear-facing position for shade while operating the backhoe.

Remove the canopy in seconds for easy trailering or to maneuver around low obstacles.

• Canopy adds 4 inches perpendicular to the flat top surface of the ROPS
• With the top unclipped and removed, the brackets extend approximately 2 1/2 inches

Features:

• Lightweight aluminum cover (weighs less than 30 lbs.)
• Toolless removal in seconds
• Integrated handles with quick-release latches
• Reversible (rear-facing for backhoe operation)
• Adjustable positioning (fits angled or straight ROPS)
• Canopy top adjusts 6 inches forward or aft
• Installs in 30 minutes
• Trailerable up to 35 mph
• Made in the U.S.

Specs:

• Fits square or rectangular ROPS
• 10 inches of flat surface on top of ROPS
• 2 inches to 3 inches ROPS width
• 1.5 inches to 2.75 inches ROPS thickness
• ROPS can be angled +/- 36 degrees
• Adjustable 6 inches forward and back
• Dimensions: 56 inches long and 42 inches wide at the back, tapering to 37 inches in the front