#7J060-57810FR B2650 B3350 Brush Guard Insert

(40 minutes)
Installation was a "piece of cake" except for drilling the 4 holes in my tractor frame. The Messick's part fit perfect, no adjustment needed. I was impressed that it was all one piece of steel, nothing welded together. The supplied bolts that connect the brush guard to the tractor were quality stainless steel. I have a grapple and punched one hole through my grill which fortunately did not hit my radiator.

1/25/2024
ROSEBURG, OR
Eugene

(30 minutes)
good drill bit and oil don't go fast slow and steady wins the race

6/22/2023
PORT HURON, MI
william

(30 minutes)
Just insert the guard in position use welding clamps to hold it in place . Marked each hole with a sharpie. Used a center punch in the center of each mark. Removed guard and drilled a 1/8 hole . Then drilled the 1/4 hole. Mount the guard in bolt it down. Note the tractor guard frame is a weldment the tolerance will very from tractor to tractor. I had to bend the mounting tabs in a little to make the guard slide into the frame. Not a big deal

5/7/2023
Davisburg, MI
Samuel