(30 minutes)
Install was easy getting out the old plow bolts was a little tough. I used vice grips to hold old plow bolt, penetrating oil. You will need a 3/8" drive breaker bar, 3/8 extension, ratchet and 9/16 6 point sockets long and short. Leave one bolt in until you get the bolt of under the deck. Clean area before installing new one. Note save the old washers I reused them with new flat washer and lock washer the new flat washer is not as thick or as big in dia. I also slapped some grease on the mounting surface service. Repeat both sides.
Install was easy getting out the old plow bolts was a little tough. I used vice grips to hold old plow bolt, penetrating oil. You will need a 3/8" drive breaker bar, 3/8 extension, ratchet and 9/16 6 point sockets long and short. Leave one bolt in until you get the bolt of under the deck. Clean area before installing new one. Note save the old washers I reused them with new flat washer and lock washer the new flat washer is not as thick or as big in dia. I also slapped some grease on the mounting surface service. Repeat both sides.
DAYTON, TX
Mr