#FR4211H 12V DC 20 GPM Fuel Transfer Pump Kit with Meter & Nozzle

• Fill-Rite FR4211H 4200 Series heavy-duty fuel transfer pump kit (12-volt direct current (DC), 20 gallons per minute (GPM)).
• Cast-iron construction with rotatable (180°) electrical junction box for easier installation.
• Thermally protected motor, built-in strainer, and heavy-duty on/off switch lever.

Performance Specifications

• Maximum flow rate: 20 GPM (flow range 0–20 GPM)
• Inlet / outlet thread size: 1 in. / 1 in.
• Mounting size / thread / type: 2 in. / National Pipe Thread (NPT) / electric
• Duty cycle: 30 minutes
• Motor power: 0.25
• Current: 19 amps
• Operating temperature: -17°F to 105°F (degrees Fahrenheit)
• Suction lift: 8 ft (feet)
• Dry vacuum: 5 in. Hg (inches of mercury)
• Max discharge / operating pressure: 16 PSI (pounds per square inch)
• Discharge head: 37 ft (feet)
• Strainer mesh size: 20 x 20 micron
• Meter accuracy: ±2%
• Repeatability: ±0.38%
• Display digits: 4
• Viscosity range: 1 to 4 cSt (centistokes)

Included Accessories

• Meter: 901C mechanical meter (gallons)
• Discharge hose: 1 in. x 12 ft hose with static ground wire
• Nozzle: 1 in. cast aluminum manual nozzle
• Ground wire: Yes
• Cable: 18 ft length, 12 gauge, bare leads
• Battery quantity: 1

Dimensions / Weight

• Assembled depth: 6.5 in.
• Assembled weight: 27.5 lb
• Package height: 7 in.
• Gross weight: 44.140 lb