1.Remove shroud & radiator. remove old suction fan. Install new fan and re assemble the rest. If your cooling system is already clean then you are done. very simple ; )
Tip: If your system contains dark rusty coolant
Follow this advise.
1. Order new thermostat and gasket. Also order new water pump and gasket.
2. Flush your block and radiator with 2 quarts of radiator flush and clean water following directions from the makers of the flush that you buy.
3. Install new thermostat , water pump, then suction fan.
4 reinstall cleaned radiator and shroud.
5. Refill radiator and purge air from cooling system.
Re check water level untill you know that there are no leaks and coolant level stays full.
6. Check transmision and motor oil level .
7. Go target practice.
8. Test tractor.
9.brush hog
10.park tractor and go fishing at the pond.
1.Remove shroud & radiator. remove old suction fan. Install new fan and re assemble the rest. If your cooling system is already clean then you are done. very simple ; ) Tip: If your system contains dark rusty coolant Follow this advise. 1. Order new thermostat and gasket. Also order new water pump and gasket. 2. Flush your block and radiator with 2 quarts of radiator flush and clean water following directions from the makers of the flush that you buy. 3. Install new thermostat , water pump, then suction fan. 4 reinstall cleaned radiator and shroud. 5. Refill radiator and purge air from cooling system. Re check water level untill you know that there are no leaks and coolant level stays full. 6. Check transmision and motor oil level . 7. Go target practice. 8. Test tractor. 9.brush hog 10.park tractor and go fishing at the pond.
TULSA, OK
Farris