#70000-00777 KIT HEATER, BLOC

(30 minutes)
My is RTV1100, very easy to access. Backed it up into driveway which is on an angle and drilled a hole into the freeze plug and pulled it out with a curved pliers letting the fluid run out with what little dirt was there. Cleaned the hole out and put gasket shellac on the block heater and tapped it in with a 1” socket. About 2 cups of antifreeze was replaced. No leaks

12/19/2024
NOKOMIS, IL
Jerry

(1 hour)
I was nervous about removing the old one. I warmed the engine up and used a pipe wrench, tapping with a hammer, rotating back and forth. It took some time, but finally loosened up. Put some gasket sealant on the new one and tapped it in with a 1" socket like the directions say. I did put some gasket sealant on it.

1/26/2022
PUEBLO, CO
MATT