$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

#77700-05386 BX1870 BX1880 BX2370 Filter Kit

Name: Kubota #77700-05386 BX1870 BX1880 BX2370 Filter Kit
Brand: Kubota
SKU: 77700-05386
Price: 81.15 USD
Availability: InStock

$81.15

11 In Stock

Weight: 1.85 lbs

Contents

element not set

This part fits your tractor

This part fits 5 models

FILTER KIT BX

Product Specifications

Property	Value
Product Series	BX
Filter Kits	BX1870, BX1880, BX2370

Installation Tips

(2 hours)
Ensure you crimp the fuel lines prior to removing and installing the fuel filters. Also keep a rag handy for any spills. The same for replacing the hydraulic and oil filters. Ensure the fuel filters are installed in the proper direction. When draining the oil, remove the dip stick and/or the crank case filler cap.

4/28/2025
MAYBEE, MI
KENNETH

(2 minutes)
I removed the skid plate. A very tight fit but should have only removed just 1 bolt from each side and leave the other upper bolt in just loosen the upper bolt and swing the plate downward. You tube show the filter change leaving the skid plate in place but no way could I get my hand up there without moving the skid plate. Also get small clamps for pinching the fuel line. Definitely took longer due to difficult time with skid plate

1/6/2024
CAPTAIN COOK, HI
Thomas

(3 hours)
Three hours from walking out to the garage to getting cleaned up. I'm meticulous, so I took more time to make sure all fluid was out and everything was just right. - Air Filter is simple plug and play. - Engine oil and filter wasn't too bad, filter was tight and needed the filter wrench which wanted to spin on the filter. - Pulled skid plate that blocks trans filters and lower fuel filter a little, figured it was best to get that out of the way. Also pulled both rear wheel/tires for simplicity and reach. - Fuel filter underneath was more tricky than expected to get the hose off. - Trans filter was easy to get to (with skid plate off) so was simple. - Trans screen was dirty, so well worth cleaning. Make sure you have the pan underneath as it still dumps a good bit of fluid.

8/23/2022
HARPERS FERRY, WV
Brian

(1 hour)
Change fuel filters one at time. Remove and replace the primary and start the engine then replace the secondary and start the engine. The prevents any chance of air in the system. The primary is a bit difficult due to the location near the frame. Removing the left rear tire makes the process easier. Total time is high due to this step.

4/1/2022
Auburn, NY
Stephen

Show all 4