(10 minutes)
Perfect OEM replacement for the quick connect hoses on my LA364 loader/B2920 tractor. At first i thought they might be too short but they are identical in length to the ones installed at the factory. You will need to reuse the quick connect female fitting from your existing hose. One oddity, original hoses use a metric 16 wrench, new ones use a metric 18 wrench. Actual threads are the same on both, but the new ones just have a beefier “nut”.
9/4/2024 LANCASTER, MA CC
(10 minutes)
Do your best to take the load off of the loader before removing the old hose. Make sure you transfer any color coded caps or tape to the new line so you can keep them straight when re-attaching to the tractor.
5/8/2024 BLOOMFIELD, NY Kurt
(20 minutes)
Check other hoses. Found two more that had rubbed and leaked. For ft.bucket
10/24/2023 NINEVEH, NY DALE
(20 minutes)
Put 2 hoses on . Needed to take one off to put new hose on . Disconnect one at a time so not to mix up . Worst part was feeding it through protective cover.
Perfect OEM replacement for the quick connect hoses on my LA364 loader/B2920 tractor. At first i thought they might be too short but they are identical in length to the ones installed at the factory. You will need to reuse the quick connect female fitting from your existing hose. One oddity, original hoses use a metric 16 wrench, new ones use a metric 18 wrench. Actual threads are the same on both, but the new ones just have a beefier “nut”.
LANCASTER, MA
CC