(10 minutes)
The tractor would start fine and then shutoff intermittently. There was no consistency or apparent reason. We could here the fuel shut off valve clicking. Thinking the easiest thing to do was to replace the seat switch since ours was worn and seem to have a lot of play in the lever. This was very easy to replace but did not fix the problem. There is only one nut to take off and one toggle electrical connection. All that is required is a 10 mm wrench.
8/3/2024 HIRAM, OH Butternut
(10 minutes)
Easy, advise taking a photo of how Kubota arranged zip tie originally. Replicating the original run of wires after several days hard to remember wire arrangement.
7/10/2024 ONALASKA, WA Dan
Unrated
(6 minutes)
After installing a new fuel pump, and a new fuel shut off solenoid, and a new battery, the seat switch was the issue after installing it. Tractor runs fine thanks good part..
4/19/2024 INDEPENDENCE, KS Russell
(5 minutes)
10mm socket to remove bolt and install replacement. Connector easily disconnects and new part pairs perfectly.
8/30/2023 VONORE, TN KENT
Unrated
(30 minutes)
Don't cut the zip tie that's on there from
the factory. You don't need to.
The tractor would start fine and then shutoff intermittently. There was no consistency or apparent reason. We could here the fuel shut off valve clicking. Thinking the easiest thing to do was to replace the seat switch since ours was worn and seem to have a lot of play in the lever. This was very easy to replace but did not fix the problem. There is only one nut to take off and one toggle electrical connection. All that is required is a 10 mm wrench.
HIRAM, OH
Butternut