#HHTA0-37710 Hydraulic Oil Filter

(5 minutes)

9/21/2023
Archdale, NC
John

(2 minutes)
Wow, I used the Shop-Vac trick and it worked great!!! Used duct-tape to attach a spout from a funnel, loosened the old filter until is started leaking, turned on the Shop-Vac an only lost a tine bit of Hydro oil as I put the new one on. This is the winner !!!

9/23/2022
BLUEMONT, VA
PETER

(5 minutes)

7/28/2022
THOMPSONVILLE, MI
Richard

(2 minutes)
Changed filter at 50 hours without changing fluid. Need a catch pan beneath with a fair amount of fluid loss. Wider catch pan will minimize mess as fluid tends to splash out.

6/23/2022
ROCKWALL, TX
THomas

Unrated (15 minutes)
Use a shop vac and put the hose over the fill hole for the hydraulic fluid hole and turn it on. When you take the filters off you loose hardly any fluid out of the rear end.

2/26/2022
COLLISON, IL
KENT

(5 minutes)
Loosen filter, punch hole in end of filter to drain so as to not make a mess inside the frame. remove lines covering the filter to access the filter.

2/17/2022
Vernon, TX
Charles