Kubota > K5761-33540

Installation Tips

$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

#K5761-33540 Oil Seal

Name: Kubota #K5761-33540 Oil Seal
Brand: Kubota
SKU: K5761-33540
Price: 31.84 USD
Availability: InStock

$31.84

> 100 In Stock

Weight: 0.05 lbs

element not set

This part fits 135 models

Installation Tips

(2 hours)
After removing the gear case and flipping it over I was able to remove the lower seal of the mower bevel gear case by drilling 2 opposing holes in the seal metal ring and inserting screws to pry the seal out without disassembling the complete gear box. Once removed I used a magnet to sweep the gear box for any drill shavings, which there were none, as I used the magnet as I drilled. Once removed I lubed the new seal and tapped it in place and refilled with 90W gear lube. Did a 2 hr mowing job and no leak and the temperature of the box was 135 degrees F.

6/16/2024
MUNCIE, IN
Bryan

Unrated (15 minutes)
No disassembly required if you use a pick to remove the old seal. Use a punch and hammer to install new one.

6/4/2024
Carmel, IN
Kenyon

(3 hours)
Installed the shaft, bearing, and seal together.Followed online instructions by watching others perform the job.

4/24/2024
GREENBRIER, AR
Sherman

Unrated

2/6/2024
WEST POINT, VA
James

Unrated
Lubricate with atf and tp with hammer.

9/18/2023
BURTON, OH
Scott

(4 hours)
Use extreme caution when removing gearbox pulley. Definitely use a puller and DO NOT pry against gearbox case. Fortunately I had an old gearbox to practice on and I snapped the shaft keeper ring inside the gearbox. The hardest part about this job is finding or modifying a puller to pull the pulley.

8/24/2023
MOUNT CLARE, WV
WARREN

(30 minutes)

8/14/2023
GARDENDALE, AL
Jeff

(3 minutes)
Use A 1 1/2 inch piece of pipe and a hammer to gently seat the seal equally. Apply Vaseline or grease to seal rim before installing.

7/20/2023
BREWSTER, NY
Michael

(1 minute)
Easy

7/14/2023
TOULON, IL
stevn