#L8430 Telescopic Stabilizer Kit

(20 minutes)
Loosen all connecting points on lift arms first to prevent linkage from turning.

11/19/2023
Buffalo Junction, VA
RONALD

(45 minutes)
Simple installation with minimal tool required. After installation I was disappointed with the clearance between the stabilizer bar and the tire, when attached to my box scraper. There was to much space where the pins went through the lifting arms. Simple fix got 2- 3/4 iron couplings and fit them in as spacers to push the lift arms closer to the center of the box, giving safe clearance between the stabilizer bars and the tire.

2/4/2023
REDDING, CA
SCOTT

Unrated (30 minutes)

11/28/2022
WEAVERVILLE, NC
Brandon

(15 minutes)
Simple and straight forward. Watch the video for an example.

7/20/2022
KEWASKUM, WI
Rick

7/20/2022
WALLINGFORD, VT
MARK

(45 minutes)
Replace provided locking pins with push button release pins. Makes changes much quicker and easier...

7/18/2022
MONETTA, SC
Seldon

(30 minutes)
Park your tractor in a shady spot. Easiest and best upgrade I've done on my tractor to date. Makes implement swapping much easier

7/7/2022
Riverview, FL
Phillip

(1 hour)
Hardest part was removing the cotter pins on the original stabilizer bars. Install was easy after that point. I used sockets to tighten the bolts as I did not have wrenches and the sockets worked fine.

6/22/2022
VESTAL, NY
Eugene

Unrated (30 minutes)
Getting the old cotter pins out was the most tedious part. Other than that, it was easy as can be.

6/1/2022
BROKEN ARROW, OK
Tom

(39 minutes)
Takes a while to line up and make sure the brackets are on the correct way. Take them out of the sleeves and turn them around as the holes will not line up if you do not. My package had some leftover bolts that I did not use.

5/31/2022
NANCY, KY
Michael

(20 minutes)
Have all your tools handy and installation is a breeze. Hardest part was fumbling with the cotter pins.

5/23/2022
CAMP LEJEUNE, NC
Christopher

Unrated (15 minutes)
Can't get much easier than this. Two bolts, two pins per arm and you are done. Beats the snot out of those pain-in-the-neck turnbuckles and locking nuts and all the knuckle busting nonsense. Best two bucks spent on this machine.

5/2/2022
CARTHAGE, TN
brian

Unrated (15 minutes)

4/8/2022
ACWORTH, GA
Thomas

(30 minutes)

2/24/2022
STONEWALL, MS
Dewayne

Unrated
Installation was very straight forward and was done in under an hour.

1/15/2022
SUPPLY, NC
Jason

Unrated (20 minutes)

1/11/2022
Chatsworth, GA
A&R