Buy Rental Equipment

Most dealers wait until they are slow to update their online used equipment listings making the data several days or weeks out of date. Here at Messicks we do things differently, our online listings are LIVE. As soon as our salesmen learn about a piece you can to.

We're human. Prices and infomation reflect the best of our knowledge and maybe subject to change.


Total Pictures: 6
Total Pictures: 25
Total Pictures: 11
Total Pictures: 8
Total Pictures: 7
Total Pictures: 26

$35,900.00

Available

(call for pricing)

Available
Total Pictures: 5

LANDPRIDE FM3188 $6,350.00

Available at Elizabethtown
3-PT FLAIL MOWER, Cutting Width: 88 in, Overall Width: 96 in, Height: 45 in, Depth: 43 in, Approximate Machine Weight: 1300 lbs, Cutting Capacity: 1 in, Cutting Height: 1/2 - 6 in, Deck Material Thickness: 3/16 in, Knives: Fine Cut Knives, Rotor Shaft Speed: 2140 RPM, Rotor Diameter: 5 1/2 in, Rotor Rotation: Reverse, Knife Tip Speed: 9805 fpm, Number of Knives: 48 Fine cutting knives, Hitch Type: Cat. l and ll offset hitch, Offset Hitch: 7 3/4 in, Left & Right, Manual Screw-Type, PTO Speed: 540 RPM, Driveline: Cat. 4, Belt Type: (4) - "SPB" Section belts, Gearbox Type: 540 RPM with internal over-running Clutch Gearbox Rating: 80 HP, Gearbox Lubrication: SAE EP 90W, Gearbox Oil Capacity: 3.3 pints, Rear Roller Diameter: 5 1/2 in. Nice Condition,

KUBOTA KX040-4R3P $47,500.00

Available at Elizabethtown
665 hours, 2013 year, 42hp Kubota diesel w/auto-idle control, 2-speed travel w/auto-shift, selectable pattern hydraulic pilot controls, front dozer blade w/float mode, premium cab with heater/defroster & a/c, hi-back suspension seat, front-mounted instrument panel, cab & boom mounted worklamps, dual independent auxililary hydraulic circuits w/boom plumbing (9.8gpm thumb circuit & 17.2gpm attachment circuit, two-tine hydraulic thumb, Kubota mechanical quick coupler, includes 12" & 24" & 36" buckets, 11' 2.7" max dig depth, 12' 9.5" max dump height, 9535lb bucket breakout force, 4112lb dipperstick breakout force, 9500lb operating weight, Serial #20741

CONEQTEC AP450HDEL $13,989.00

Available at Elizabethtown
Commercial Asphalt Cold Planer Attachment / 18" cutting width / 6" max cutting depth / 56 carbide pic teeth / center-pivot raise/lower design maximizes stability / easy cutting "open drum" requires less hydraulic horsepower & throws less debris / upgraded to hi-torque H.D. hydraulic motor option / direct drive hyd motor = less heat & hp loss than gear reduction competitors (21gpm to 40gpm hi-flow hydraulic requirement) / hydraulic power tilt 15 degrees to RH or LH sides / 24" travel hydraulic side-shift / electric-over-hydraulic controls with 14-pin elec harness/plug / approx 1700lb weight / One Year Warranty! / Serial #CI3038 / Discounted Demo Unit used approx 1 hour - New List Price at $18600 - Compare to New Sale Price at $15689 - Now Save an Additional $1700!!! - Only One Available at This Price!

NEW HOLLAND LM5080 $68,000.00

Available at Elizabethtown
Telehandler, 3892 Hours, 120 Hp. Power Shift Transmission, 3 Section Boom With 31.5ft Reach and 7300lb Max Lift Capacity. 96" Bucket, Fully Enclosed Cab With Heat and A/C, Air Suspension Seat, Hydraulic Frame Leveling: + / - 8 Degrees, Hydraulic Attachment Lock, 460/70R24 Tires.

KUBOTA KX0804SR3 $92,300.00

Sale Pending at Halifax
Messick rental fleet. Approx 200 hours and counting. All scheduled maintenance is complete. Save $$$ off new. Contact for details.

VIRNIG VBW72HF33 $6,700.00

Available at Elizabethtown
SNOW BLOWER: 72" WIDTH - HIGH FLOW MODEL, INCLUDES 12 VOLT ACCESSORY PLUG. 72" high-flow snow blower. Snow rental unit. Compare to new at $7700.

CAT 416C $35,900.00

Available at Elizabethtown
2921 hours, 1999 year, 4WD, 79hp Cat 3054 diesel, 4spd fwd & 4spd rev transmission, deluxe cab w/heater, radio pkg, new batteries! rear extend-a-hoe with 12" & 24" trenching buckets (18' 2" max dig depth), front loader w/hydraulic bucket quick coupler, 19.5x24 Rear tires approx 30%, 12.5x30-18 front tires approx 80%, approx 15,500lb operating weight, Serial #4ZN187797

BELLTEC NC300 (call for pricing)

Available at Carlisle
AUGER DRIVE

PEQUEA TRHD16BT $4,995.00

Available at Carlisle
Like new Pequea TRHD16BT 12,000 LB. GVW used 1 time as customer didn't want to do all that pendot requires to be legal 16' flat 4' beavertail with ladder ramps 5' long. Customer paid 5975.00 last august when he purchased it from us.