60" Rotary Mower, Universal Skid Loader Quick Attach, Tail Wheel, Chain Shielding, Hoses and Flat Faced Couplers.

60" box blade for tractors < 30Hp. Nice condition.

72" Box Blade, Three Point Hitch, 7 Adjustable Scarifier Teeth, 1/2" x 6" Bolt On Reversable Cutting Edges, 2019 Model Year. 72" Box Blade, Three Point Hitch, 7 Adjustable Scarifier Teeth, 1/2" x 6" Bolt On Reversable Cutting Edges, 2019 Model Year.

3 point hitch mounting / 60" finishing mower / rear discharge / 540 PTO / 4 solid swiveling wheels

60 inch 3 Point CAT 1 Floating Hitch Finish Mower, 540 RPM, 15-40 HP Required, Rear Discharge, 4 Solid Rubber Gauge Wheels, Mowing Height Ranges From 3/4 - 5 1/4 inches in 1/2 inch Increments, Weighs 685 Lbs., Great condition, always garage kept.

72" Finish Mower, 4 Adjustable Gauge Wheels, Three Point Hitch w/Floating Lift Links, 540 RPM.

3-Point- Fertilizer, Lime, Salt Spreader, Very Good Condition, Low Usage, 350 lbs. Capacity, 5.85 Cu. Ft.

The Land Pride PD15 is a Category 1, 3-point post hole digger for tractors 20-40 HP, featuring a 48" auger length with 9" diameter, cast steel fishtail tips, and 1/4" flighting, designed for general-duty tasks by homeowners, farmers, and landscapers, with key specs including a 3.18:1 ratio gearbox and Cat II shear bolt driveline. Complete PTO shaft.

Used Land Pride RC4710 roadside rotary cutter with a 10-foot cutting width and a 4-inch cutting capacity, built for tractors up to 250HP. This heavy-duty model features a 10-gauge steel deck, 1/4-inch side skirts, and a Cat-6 constant-velocity driveline with slip-clutch protection. Gearboxes are rated up to 250 HP at the divider and 210 HP at the center and wings. The cutter weighs approximately 5,160 lbs, with six heat-treated alloy blades that provide excellent cut overlap for a clean finish. A robust rotary cutter designed for pasture maintenance, roadside mowing, and general brush control. Just serviced by Messick's, new blades. Purchased new 8/2023.

2018 Model year, 42 inch working width, 540 PTO, cat 1 hitch, laminated tail wheel, slip clutch. In great shape ready to work.

Nice 48" Rotary cutter for 20-60Hp tractors. Compare to $2656 new.

The Land Pride RCR1260 is a like-new 60" rotary cutter built for trimming pastures, fields, and road edges with clean, reliable performance. Its sturdy deck, heavy-duty gearbox, and shear-bolt driveline make it a dependable match for compact and utility tractors. The cutter shows very little use, with blades and deck in excellent condition. A solid chance to save on a nearly new mower without sacrificing quality.

60" rotary cutter / 540PTO with slip clutch / laminated tail wheel / front & rear rubber shielding / 50 hp. gearbox / 1" cutting capacity / Kubota orange paint / mower used very little

The Land Pride RCR1272 is a 72-inch light-duty rotary cutter designed for compact and small utility tractors, well suited for maintaining pastures, roadsides, and overgrown areas. It is built to handle grass, weeds, and light brush up to approximately 1 inch in diameter and is typically paired with tractors in the 20–40 horsepower range using a Category 1 three-point hitch and 540 RPM PTO. The cutter features a floating hitch for improved ground following, a reinforced 11-gauge steel deck, adjustable tailwheel for consistent cutting height

The Land Pride RTA1258 is a 58-inch wide, Category 1, forward-rotation rotary tiller for tractors with 20-50 horsepower, featuring a 15" rotor swing, 4 heat-treated "C" tines per flange, a durable cast-iron gearbox, and a slip-clutch driveline for protection, designed for deep tilling and quick soil turning. Key specs include 7 flanges, adjustable skid shoes, with a weight around 448 lbs. Compare to $3676 new.

60" Snow Push Box, Rubber Edge, Optional Back Drag Kit Installed, Unit Was Used Once. Garage Kept.

Quick-Hitch compatible ballast box, cat I 3-Point hitch, capacity rating up to 600 lbs, 4 cubic ft. volume.