Self-propelled "StackCruiser" with a Bale Size/Capacity of 14x18x46"/160 bales or 16x18x46"/133 bales; Stack Size is 3 wide by 9 high. Ford V-8 460 gas engine, 5-speed transmission with two speed rear, A/C works. Unit operates as it should.

25HP Shibaura Diesel Engine, Hydrostatic Transmission, Power Steering, 1583 Hours, Turf Tires, New Holland 7308 Front End Loader With Material Bucket, New Holland 914A 72" Under Mount Shaft Driven Mower Deck

30' Transport Hay Elevator, 3/4 hp. - 120v. Electric Motor Drive, Lower Hopper

Pull type 2-spinner tedder, manual adjustment, 2 gauge wheels, 540 pto, tines are all there

1000 RPM PTO horizontal beater spreader with hydraulic end gate, dual 667X pintle apron chain, 16.5 x 16.1 flotation tires, top beater, hydraulic drive with in-cab speed control. Poly floor, end gate is rusting through, 2012 model year, frame is rusting

9' 2” Cut / Chevron Rubber Rolls / Standard Tongue / QuickMax Knives 14 Degree / Crop Lifters / 7 Oval Discs / ShockPRO Hub Protection / Rock Guards / Hardened Steel Skid Shoes / Crop Lifters / CV 540 Pto Shaft / Header Flotation / Transport Lights / Hydraulic Swing Tongue / Hydraulic Header Tilt.

Very Nice 10' 4” Cut / Upgraded Chevron Rubber Rolls / Drawbar Swivel Hitch / QuickMax Knives 14 Degree / Crop Lifters / 8 Oval Discs / ShockPRO Hub Protection / Rock Guards / Hardened Steel Skid Shoes / Crop Lifters / 540 Pto Shaft / Header Flotation / Hydraulic Swing Tongue / Hydraulic Tilt.

2022 New Holland 210RSW, Drawbar Swivel, Mow Max Cutterbar with Quick Change Knives and Shear Hubs, Rubber Rollers, Adjustable Skid Shoes, 540 PTO, Unit is in great shape and has had all the oils changed last year. Unit only has about 120 acres on it.

8.5' working width RolaBar rake with good tines, manual height adjustment, hitch & jack, new driveline, cross & yoke.

60" mid-mount side discharge mower deck. Fits New Holland Boomer tractors. Driveline & mounts included. Working condition.

Hay Pick up Head / Came Off Of New Holland FP 230 Harvester / Shaft Driven / Pick Teeth OK / Auger Ok

2021 Model Year / 13' Cutting Width / 125” Rubber Chevron Conditioning Rolls / Hydraulic Swing Center Pivot / MowMax II Disc Cutter Bar / 8 Large Oval Discs / Shock PRO Hubs / Drawbar Swivel Hitch / Heavy-Duty Cast-Iron Rock Guards / Hardened Steel Skid Shoes / 1000 Pto / Adjustable Windrow Shields / Knives Should Be Replaced

Small square baler, hydraformatic bale tension, 70 bale thrower with hydraulic drive and electric controls, 540 PTO, should go to the field and bale

3 Row Corn Head / Narrow Rows / Mounting for New Holland FP230

3 Row Corn Head / Came Off FP 230 / Shaft Driven / Narrow Row

Like New RB450 Baler, 4 x 5 Silage special round baler, 1.8 wide pickup, No tool guage wheels, net wrap, rolling wind guard, has chopping rolls in sledge frame & tailgate, 1 owner, Dual Density Kit, Hydraulic Pick up, Less than 100 bales, Bale Command Monitor

Low profile 10' snow pusher, reversible 1''x8'' rubber edge on main blade, reversible & replacable 3/4''x5'' AR400 steel wear shoes, has optional pull back kit added to it. overall width 125.3'', operating weight is 955 lbs, overall height 24.7'', depth of pusher is 38''

9' Haybine, Unit is a Model Year 2023, Warranty until April of 2026, Unit has mowed a total of under 100 acres!, Hydraulic Lift Cylinder and Hoses, Rubber Rolls, 540 RPM, Floatation Tires, Rolls and Cutterbar are in very good condition, Reel and sheet metal are all straight, Excellent running condition

4x4 Round Baler / Twine Only / 540 CV PTO / Laced Belts / Dry Hay Only / Monitor box comes with / Needs 1 hyd remote and 12v power source to operate

Loader Backhoe w Cab, 98 HP diesel engine, 4 wheel drive, front tire size 12x16.5, rear tire size 19.5Lx24, and a sync torque converter transmission with clutch disconnect and a shuttle left-hand reverser. This machine has a 88" material bucket, a 24" digging bucket, extend-a-hoe, R-4 tires, and a cab with heat. It is clean and runs well. 5024 metered hours

New Holland 720LU EURO style Front End Loader with 84" Bucket, NO BRACKETS

30 foot flex head, 3" course knife, long dividers, poly long snouts, poly fingers on reel, poly reel with fore and aft, raise and lower, single point hydraulic hook-up, header height sensors, (does not include header wagon)

The New Holland Backhoe Series 756C is a versatile and popular utility backhoe designed for tractors. It features a quick-attach system, clear sightlines due to a curved boom, and two-lever controls for ease of operation. The backhoe is known for its ease of attachment and detachment, with quick-coupling hydraulics and self-aligning rear hangers. Here's a more detailed description of the New Holland Series 756C: Key Features: • Clear Sightlines: The curved boom design provides a wide view of the digging area. • Easy Attachment/Detachment: Features quick-coupling hydraulics and self-aligning rear hangers for a quick and one-person attachment/detachment process. • Two-Lever Controls: The two-lever wobble stick control system simplifies operation. • Low-Profile Console: The controls are housed in a low-profile console that doesn't obstruct the view. • Bucket Options: A variety of buckets are available to suit different digging needs. • Comfortable Seat: A fully adjustable and cushioned seat is designed for comfort during long work hours.

New Holland Model #77 Hydraulic Bale Thrower. Came off of a NH 565 Baler, But Fits Many Other Models.

Silage Wagon / Really Nice for the Age / Been in Covered Barn unused for last 25 Years / Tandem Gehl Running Gear / Side Unload / Roof / 3rd Beater

Bale Carrier, Three Point Hitch, Can Be Used For Round Bales Or Large Square Bales. Bale Carrier, Three Point Hitch, Can Be Used For Round Bales Or Large Square Bales.

Three Point Hitch Round Bale Mover, Comes with Push Off Bar, Repainted

2 Row Corn Head

35' Draper Head , Auto Header Height Control, 3" Knife with Standard Guards, Poly Tine Reel, Does Not Included The Header Cart

11,542 Hours, 210HP, 16x9 30KPH Full Powershift, 4 Rear Remotes, Standard Hydraulic Pump, 4x4 with Super-steer, 1997 Model Year, Front Axle was Rebuilt Last Year, 120" Bar Axle, 20.8R42 Firestone rear tires with 25% Tread life, Rear Right Tire has a cut in it, Mismatching 18.4x30 Front Tires, 16 Front Weights, 1 3/4" Large 1,000 RPM PTO, 3 Point Hitch, Air Ride Seat, Radio, AC Blows Cold, New Headlights, Some Worklights Do Not Work, Lower Right Side Step is Broke, Battery Cover Missing, Tractor Hood Latches but has a few Cracks and Reinforcements, Error Codes on the Dash are for Transmission Oil Temperature Sensor and Left Draft Pin Sensor

Pull-Type Forage Harvester, Single Axle, 900W Hay Head, Knives are Good, Everything works when he put it away.

3 point hitch post hole digger / 12'' auger / cat l 3 point / 540 pto drive / heavy duty gear box

New Holland 60" Mid Mount Mower, came off of New Holland T1510, very good condition and has the hardware to go with it.

48'' finish mower / category 1 - 3 point hitch / 540 pto drive / four swiveling gauge wheels /side discharge

12 Row Folding Chopping Corn Head with Power End Dividers and Pinching Stalk Rolls

12 row corn head, hydraulic deck plates, header height sensors, pinching knife rolls, single point hydraulic hook-up,

Small Square Baler / 75” SuperSweep 6-Bar Pickup With 156 Curved Fingers / Gauge Wheels With Roller Bearings / 283 Square Inch Feed Opening / Bale Length Controls / 14”X18” Bale Chamber / Exclusive Rotary Feeding System / Heavy Duty Knotters With Hardened Steel Billhooks / Hard Faced Needles / Bale Counter / Heavy Duty Jack / 8 Ball Twine Box / Heavy Duty Wheels & Spindles / Clevis Hitch / 3 Disc Slip Clutch / 27X9.50-15 Right Tire & 31X13.50-15 Left Tire / Hydraformatic Tension / Hydraulic Pickup / Hydraulic Swing Tongue. New Holland 72 Thrower with Speed Control / Hydraulic Drive

2010 Hayliner Small Square Baler / 75” SuperSweep 6-Bar Pickup With 156 Curved Fingers / Gauge Wheels With Roller Bearings / 283 Square Inch Feed Opening / Bale Length Controls / 14”X18” Bale Chamber / Exclusive Rotary Feeding System / Heavy Duty Knotters With Hardened Steel Billhooks / Hard Faced Needles / Bale Counter / Heavy Duty Jack / Heavy Duty 8 Ball Twine Box / Heavy Duty Wheels & Spindles / Clevis Hitch / 3 Disc Slip Clutch / 11LX14 Right Tire & 14LX16 Left Tire / Hydraformatic Tension / Cast Iron Hay Wedges / 12” Longer, Heavier Bale Case / Hardened Plunger Rails /Hydraulic Pickup / Hydraulic Swing Tongue / 1/4 Turn Chute. Includes applicator.

22 ton New Holland wood splitter. 3 point hook up.

28hp Shibaura diesel engine with 1862 hours, hydrostatic transmission, 3 point rear hitch, 540 PTO, R4 tires, 60" mid mount mower deck with front and rear anti-scalp wheels, seat is in poor shape.

37 horse power / 381 hours / cab with heat and AC / 12x12 gear transmission / R4 Tires / 3 point hitch extendable links & top link / rear 540 PTO / New Holland quick attach loader with SSL coupler and 66" bucket

New Holland Boomer 46D / 360 Hours / 3Cyl 46 hp FPT engine, 32 pto hp / 540 rpm independent pto / CVT transmission / 4WD / one set of rear remotes / Super Suite cab with heat and ac / 17.5L-24 rear tires / Cat I 3 point hitch with telescoping draft links / 250TLA quick attach loader with 3rd function / Includes 7-foot County Line 3 point blade

4'X5' baler with X-tra Sweep wide pickup and rolling wind guard, net & twine, 18L x 16.1 big flotation tires, hydraulic pickup lift, 10,300 bales, Bale Command Plus monitor

4 x 6 Baler / Roto cut unit / Extra wide 82" pick up / Net Wrap / Silage Special / Wide Flotation Tires / Pick Teeth good / Bale ramp ejector / 540 PTO / Bale count 19,593 bales, recently through shop & had several bearings replaced, test ran and greased the machine

Net Wrap Round Baler, 13,779 Bales, 5' x 6' Variable Chamber, Wide Pick Up, Bale Ramp, Good Belts, Monitor.

161 Bale Capacity Self Propelled Bale Wagon, 1408 Hours, Cab, Heat and A/C, Air Ride Seat, Radio, 500/45-22.5 Rear Tires and 15-19.5 Front Tires, Shed Kept Most of Its Life!

Only 315 Hours! New Holland Compact Track Loader, 12.6" Wide Tracks, 74hp Diesel Engine, Cab Enclosure, Heat, A/C, Air Ride Seat, Standard Flow Aux Hydraulics, E-H Controls Switch Between "H" Pattern and ISO Patterns, Hydraulic Bucket Coupler, No Bucket, Extended Limited Warranty Good Thru 4/30/26

Only 149 Hours! 2022 model year. Cab With AC & Heat / 74hp Engine / 2,700 Lbs @ 50% Tipping Load, 5,400 Lbs Tipping Load / Radial Lift Boom / EH Controls / 2 Speed / Air Ride Suspension Seat / Front Electric - Multi-Function / Self Level / Ride Control / Lap Bar / Keyless Start / 12.6” Track / Hydraulic Coupler / 8" LCD Display With Backup Camera / Fully Upgrade Wiring Harness & Speed Sensors / Upgraded Joysticks / Bluetooth Radio

MY 2022/479HR/emissions warranty remaining to 01/18/2027 /Cab With AC & Heat / 90hp Engine / 4,500 Lbs @ 50% Tipping Load, 9,000 Lbs Tipping Load / Vertical Lift Superboom / EH Controls / 2 Speed / Air Ride Suspension Seat / Front Electric - Multi-Function / Self Level / Ride Control / High Flow Lap Bar / Keyless Start / 17.7” Track / Hydraulic Coupler / 8" LCD Display With Backup Camera / Fully Upgrade Wiring Harness & Speed Sensors / Upgraded Joysticks / Bluetooth Radio. • In-cab mounted 8” Hawk Display o LCD display with rear view camera feed • Integrated Back-Up Camera o Enhances the outstanding natural cab visibility o Provides easy to control ground speed for tasks that require precision • Engine Protection o Shuts down engine when certain fault conditions are met • Ignition Time-Out o Minimizes down time by powering down when no operator is present • Economy Mode o Powers down the engine when no operator is present to preserve fuel and engine wear • Upgraded Joysticks, controls, and Bluetooth radio o Lower profile and more ergonomic design • Fully upgraded wiring harness and speed sensors o Higher quality and better performing electronics to minimize down time.

Class 8 Corn & Bean Combine /957 engine hours, 685 threshing hours / 13.01 Liter Engine For 571 Max HP / Twin 22" Diameter, 104” Long S3 Rotors / Planetary Diff Lock / 2 Speed Powered Rear Axle / 24 MPH / Hand Cleaning Device / Air Suspension Seat With Heating & Cooling / Auto Temperature Control / Multifunction Control Handle / Instructor Seat / Blue Tooth Radio / Full Sunvisor Pack With Front, Left, Right & Rear Sunvisors / LED Light Package / In Cab Electric Folding Grain Tank Cover /Feeder With Dynamic Feed Roll (DFR), Remote Front Face Adjust With DFR / 100mm – 3.93” Lift Cylinders / 27.2ft Folding Abrasive Wear Unload Auger / Electrically Controlled Unload Pivot Spout To Adjust Grain Flow Up To 3ft / Fan Bottom Shield / Corn – Bean Sieves With Remote Adjustment / Round Bar – High Moisture Concaves / Small Wire 3/16” Concaves / Remote Adjustable Rotor Vanes / 4 Row Straw Chopper with PSD System, Adjustable Deflectors And Corn Chaff Spreader / NH 372 GNSS Receiver / Autoguidance Nav II Controller / Yield & Moisture Sensors / IntelliSense automation For Continuous Self-Adjusting Settings to Achieve Peak Efficiency And Performance / IntelliCruise System For Automatic Feed Rate and Ground Speed control Based On Crop / Engine Air Compressor With 16 Gallon Pressure Tank / Manual Lock Trailer Hitch With Electrical Connection / Rotary Dust Screen With Blow Off System / 2 IntelliView IV Color Touch Screen Monitors

2010 Corn & Bean Combine, 2143 engine hours, 1553 threshing hours, Small Grain Concaves, 900/60R32 drive tires, 600/65R28 rear tires,1-Speed Powered Rear Axle, 315 Bushel Grain Bin, 3.2 Bushel per second 21' Unloading Auger, Remote Electric Mirrors, 8,370 sq. in. Self-Leveling Sieve, Harvest Suite Cab with Climate Control, 360 Degree Lighting, Center Row Finder Light, Color Touch Screen Monitor with Yield & Moisture Data Logging / Mapping, Deluxe Straw Chopper, Under shield light kit, Remote Adjustable Seives, Terrain Tracer for Lateral Tilt,Trailer Hitch, Includes: 2014, 25' flex head with crary wind system installed, And 8 row corn head / hydraulic deck plates / stainless steel liners / Auger good / 540 PTO / single hydraulic hook / 2008 model year

2007, 3976 engine hours, 2505 treshing hours, 9.0L 6 Cylinder Cursor New Holland Engine, Large Color Touch Screen Monitor, GPS, Yield and Moisture Logging, Power Adjust Mirrors, 900/60R32 Drive Tires, 540/65R30 Steering Tires, Small Grain Concaves, Self-Leveling Cleaning System, Hyd. Drive Fan with Bottom Shield, 315 Bushel Grain Bin, 3.2 Bushel Per Second,

2004, 3838 engine hours, 2511 threshing hours, 4-Wheel Drive Combine with 900/60R32 Drive Tires, 600/65R28 Steering Tires, GPS with Yield and Moisture Monitor, Small Grain Concaves, deluxe cab with heated electric mirrors, buddy seat, radio, new hydro's recently installed

Used 1 Season / Has 1 Year Factory Warranty and Cutter Bar Warranty / 10' 4” Cut / Upgraded Chevron Rubber Rolls / Drawbar Swivel Hitch / QuickMax Knives 14 Degree / Crop Lifters / 8 Oval Discs / ShockPRO Hub Protection / Rock Guards / Hardened Steel Skid Shoes / Crop Lifters / 540 Pto Shaft / Header Flotation / Hydraulic Swing Tongue / Hydraulic Tilt. Special financing terms available!! Choose .9% for 24 months, 2.9% for 36 months, or 3.9% for 48 months. Monthly repayment schedules only.

10' 4” Cut / Upgraded Chevron Rubber Conditioning Rolls / Drawbar Swivel Hitch / QuickMax Knives 14 Degree / Crop Lifters / 8 Oval Discs / ShockPRO Hub Protection / Rock Guards / Hardened Steel Skid Shoes / Crop Lifters / 540 Pto Shaft / Header Flotation / Hydraulic Swing Tongue / Hydraulic Tilt / One Owner with Very Low Acres

10' 4” Cut / Upgraded Chevron Rubber Rolls / Drawbar Swivel Hitch / QuickMax Knives 14 Degree / Crop Lifters / 8 Oval Discs / ShockPRO Hub Protection / Rock Guards / Hardened Steel Skid Shoes / Crop Lifters / 540 Pto Shaft / Header Flotation / Hydraulic Swing Tongue / Hydraulic Tilt, Low Acreage, One Owner. Special financing terms available!! Choose .9% for 24 months, 2.9% for 36 months, or 3.9% for 48 months. Monthly repayment schedules only.

2021 Model Year New Holland Duravee 1225 High Capacity Trailing Wheel Rake, Serial # YMZSL1085, 12 Wheels, Working Widths Up To 25', Optional Large 60" Wheels with 40 Tines Per Wheel For Better Ground Engagement, 2 Center Kicker Wheels with Hydraulic Raise and Lower, Walking Beam Tandem Axle, Road Lights, Center Kicker Wheel has some tines missing, Machine is in working condition, Has some tines missing from the one Center Kicker Wheel, Jack Mount is broken

2019 Mini Excavator / Cab / Long arm with thumb bracket / Zero tail Swing / Operating Weight 8,490 lbs with additional counterweight / Max Digging Depth 11' 3”, Max Dump Height 11' 10” / Yanmar 3TNV88F-ESHYB 3 Cyl. Water-cooled direct injection diesel engine / Gross 24.4 HP @2,200 RPM / Glow plugs /Enclosed Cab with Overhead opening front window, Sliding side window,Lockable door, Heater, defroster, air conditioner and Radio/USB player + 2 speakers / Suspension seat with 2” belt / Pilot operated joysticks for boom, arm, bucket, and swing with adjustable wrist rests / Foot pedals for travel control and swing Tower control / 12 Volt electrical starting system includes heavy-duty battery and starting motor / 40 Amp Alternator / Battery Master Switch / Key Start / Anti-Theft-Engine starting passwords / Dual 12V power plug receptacles / Front and rear LED working Lights / Travel alarm / Auto idle feature with on/off switch / Standard hydraulically controlled dozer blade / Rubber tracks, Track pad width: 12", Track length: 7'0", Grade-ability: 30 degrees, Ground Clearance: 11" / Two speed travel / Fully hydrostatic drive system / Control pattern selector valve / Total Auxiliary Flow:16.0 gpm @ 2,973 psi / Main Pump: 3,270 PSI / Selector valve for single or two way aux flow / Large capacity hydraulic oil cooler / Cylinder rod protection covers for dozer & boom / KLAC coupler / thumb kit for KLAC coupler / 12", 24'' HD digging bucket & 36" Tilt Ditching Bucket WITH KLAC coupler, 1018 hours

Tandem axle / Horning processor / Metal alert III / feed rolls ok / tires good / comes with 27P pick up head

3 point hitch, hydraulic lift, cutting width of 7' 10”, 6-disc modular cutter bar.

Disc Mower, With 8' Cutting Width, 540 PTO, Good Canvas, Hydraulic Lift, 3 Point Hitch

10'4" cut, Rubber Chevron Conditioning Rolls, Shock Pro Hubs, Hydraulic Raise / Lower and Tilt Header, Hydraulic Swing, Drawbar Swivel, 540 PTO Shaft, 2016 Model Year

13' Cut Discbine, Rubber Chevron Rolls, Swivel Hitch, 1000 RPM, Center Pivot, Hydraulic Lift, Transport Lights, Quick Change Knives.

1965 Hours, Skid Steer Loader with 72" Low Profile Bucket / 60hp turbo diesel with glow plugs / two speed transmission / standard foot pedal controls / e-z tilt open rops / suspension seat / electronic instrument panel with filter minder & diagnostics / worklamps, horn & back-up alarm / flasher pkg / hydraulic bucket coupler / premium 10x16.5 10ply tire package / patented NH "SuperBoom" vertical lift boom with 121" max lift height / rated 1800lb operating load & 3600lb tipping load / 5930lb operating weight.

2980 Hours, Open Station, Hand And Foot Controls, 2 Speed Transmission, Manual Coupler, 2,000 Lbs. Lifting Capacity, No Bucket.

60hp turbo diesel w/glow plugs , 2788 hours, two speed transmission, mechanical hand/foot controls, deluxe cab w/heat & a/c, keyless start, suspension seat, armrests pkg, rearview mirrors pkg, front & rear worklamps, 19gpm auxiliary hydraulics, hydraulic bucket coupler, no bucket comes with it, 12x16.5 tires, patented vertical lift "superboom" design with 121" max lift height, rated 2000lb operating load & 4000lb tipping load, 6470lb operating weight

(Company Use At Abbottstown) 4449 hours, 2012 year, 82hp Iveco turbo diesel, 2 speed transmission, 10x16.5 solid tires, mechanical hand/foot controls, deluxe enclosed cab with heat & a/c, suspension seat, front & rear worklamps, flashers pkg, counterweights pkg, 22.5 gpm hydraulic flow, hydraulic bucket coupler, bucket NOT included, vertical lift "SuperBoom" design with 129.4" max lift height, rated 2500lb operating load & 5000lb tipping load, 78.8" cab roof height, 7900lb operating weight, Serial #NCM446477

Skid loader with deluxe cab, heat, a/c, 2 speed transmission, seat belt, air ride suspension seat, hand and foot operated controls, HD hydraulic coupler, HD rear door, standard flow hydraulics, 12x16.5 Severe Duty tire package, battery disconnect, multi function joystick, factory radio with speakers and 84" bucket, weight kit... *L234 has 3400lb rated operating capacity, 90hp turbo diesel engine, 2017 model year

90hp turbo diesel engine / two speed transmission / selectable pattern E/H joystick controls pkg / hand & foot throttles / e-z tilt deluxe pressurized cab with heater/defroster & a/c / premium air-ride seat pkg / pull-down lap-bar/armrest / rearview mirror / deluxe handles with multi-function controls & wire harness with 14-pin electric plug / Ride Control & Self-Leveling Performace pkg / digital instrument panel with guages, filter minder, diagnostics & keyless start / heavy duty worklamps pkg includes 2-front & 2-corner & 2-rear worklamps / horn & back-up alarm / master battery disconnect switch / dust & debris seal pkg / rear steel hoods pkg / proportional thumbwheel control of 24.2gpm std-flow & 37.6gpm hi-flow auxiliary hydraulics with connect-under-pressure flat-face couplers / hydraulic bucket coupler / 12x16.5 tire pkg / patented NH "SuperBoom" vertical lift boom 131" max lift height / rated 3400lb operating load & 6800lb tipping load / 8900lb operating weight / FOB Messicks Wysox, Pa

Skid Steer Loader, 2023 year, 1993 hours, 60hp, single-speed transmission, mechanical hand/foot controls, e-z tilt enclosed cab with sliding side windows & removable front entry door w/wiper (without heat or a/c), suspension seat, safety lap-bar/armrest, 18gpm aux hydraulics, manual bucket coupler, bucket not included, 10x16.5 8ply tires, "power dig" radial boom rated 1600lb operating load, 112" max lift height, 59.8" outside tire width, low 75.5" cab roof height, 5645lb operating weight, Serial #NPM424556

1443 hours, 2023 year, 60hp turbo diesel w/glow plugs & block heater, single-speed transmission, mechanical hand/foot controls, e-z tilt open ROPS w/glass sliding side windows, suspension seat, lap-bar armrest / EIC instrument panel with guages & systems monitoring, keyless start, am/fm/wb/bluetooth radio, 2-front & 2-corner & 2-rear LED worklamps, 18.4gpm aux hydraulics, manual bucket coupler, 66" low profile bucket, 10x16.5 tires approx 50%, radial boom rated 1600lb operating load & 3200lb tipping load, 112" max lift height, 59.8" outside tire width, 75.5" cab roof height, 5645lb operating weight, factory warranty thru 2000-hours or 12-25, Serial #NPM447090

Approx 30 hours / 2023 year / Cab With AC & Heat / 67hp Engine / 2,000 Lbs SAE ROC @ 50% Tipping Load, 4,000 Lbs Tipping Load / Vertical Lift Superboom / EH Controls / 2 Speed / 8" LCD Display With Backup Camera / Air Suspension Seat / Front Electric - Multi-Function / Self Level / Ride Control / Lap Bar / 12X16.5 Heavy Duty Tires / Keyless Start / Fully Upgrade Wiring Harness & Speed Sensors / Upgraded Joysticks / Bluetooth Radio / Hydraulic Coupler / Bucket NOT Included. Full Factory Warranty Until 11/27/2025.

Cab With AC & Heat / 74hp Engine / 2,800 Lbs SAE ROC @ 50% Tipping Load, 5,600 Lbs Tipping Load / Vertical Lift Superboom / Hand & Foot Controls / 2 Speed / 8" LCD Display With Backup Camera / Suspension Seat / Front Electric - Multi-Function / Lap Bar / 12X16.5 Heavy Duty Tires / Keyless Start / Fully Upgrade Wiring Harness & Speed Sensors / Upgraded Joysticks / Bluetooth Radio / Hydraulic Coupler.

74 hp, 2-Speed Mechanical Controls, Cab- heat & air, Standard Flow Hydrualics, 84" Bucket, 2020 MY