(1 minute)
Have to take it all apart to put belt back on.leave off one pulley then pull to put belt back on.videos on YouTube.Don’t cut on your deck for access.don’t need to.
6/8/2024 RICHMOND, KY Dbi
Make sure you install the spring into the tensioner arm from the top side with the hook pointing towards the deck. If you install it backwards ( which is a lot easier ) the spring will rub against the deck during use and eventually break.
8/23/2023 BONIFAY, FL Steve
Unrated
(30 minutes)
8/9/2023 COLDWATER, MS phillip
(5 minutes)
Put a 13/16 socket and pull handle on the idler pulley, pull the belt tight and slip the spring into its mounting position.
7/8/2023 LUGOFF, SC Angela
Unrated
(25 minutes)
I connect one end of a turnbuckle to one of the spring hooks. The other end of the turnbuckle connects to the mower frame. I then turn the turnbuckle until the spring hook falls into place.
MONMOUTH, IL
DOUG