Filters (0)

48" Floating Forks / 4000 pound / Skid Loader Mounting / Adjustable Left and Right / Rear Backing Guard / One Fork Is Bent Down A Little From Other

Stump grinder / Screw Splitter. The Baumalight RSS580 is a screw splitter attachment for skid steers designed to split logs and wood. It's a heavy-duty tool with a planetary drive, hydraulically driven motor, and a 2" hex shaft or flange mount. The splitter can be used for both horizontal and vertical splitting. RSS Skidsteer models have a Stump Planer tool that is designed to mount using a Skidsteer plate. The RSS model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades.

SWA750HX570 Skid Wing Mower, 42" rotary style cutter head, 7 foot reach, 30-40 GPM required oil flow, like new, only used one time, 4 1/2" - 7 1/4" cutting capacity based off hydraulic flow, will trim trees, mow over a guard rail, universal skid loader mounting, see link for more details - https://baumalight.com/product/boom-mower-skidsteer/swa750 - Compare to new at over $24,000.00!

60" Bobcat V-Blade, folds back to approx 48" for side walks. Skid loader hookup with Bobcat 8-pin electrical plug. Great physical shape.

48" Pallet Forks, 5500 lb rated, walk thru design, side entry step, load securing D-ring Heavy Duty SSL Pallet Forks, rated 5500lb capacity, 48" length fork tines with adjustable spacing, walk-thru style rear guard, side entry step, load securing D-ring, Serial #602980

84" LP bucket / asphalt stuck inside / side cutters / bucket is straight but has some wear.

This post driver setup has been designed especially for driving tall posts in orchards or vineyards where narrow row spacing and uneven terrain are a problem. The post driver can be carried by 3-point forks or a front lift. This allows it to be hooked up and unhooked in minutes. An adjustable bottom support gives the unit stability, allowing the operator to drive posts with the frame sitting on the ground. This frame also supports the unit when it is unhooked from the tractor. A four lever control valve allows the operator to adjust the tilt in both directions as well as 3 foot of travel side to side of the tractor. This allows the tractor driver to travel straight down the row, with less maneuvering resulting in faster post installation saving both time and money. Features: Impact: 30,000 lbs, Max post width: 7?, Adjustable for different post heights, Hydraulic base plate for tilt and offset, Tilt and offset: 15 degrees, Flow requirement: 3-4 GPM, 3 FT of hydraulic side travel adjustment, Adjustable support foot, Head Weight: 445 lbs. Only used a few times, compared to new at $9,700.

Tree Spade, Skid steer mount, Adjustable Stands, Swing Door, Hydraulic Functions with Lever Controls upgraded unit with no cables!, 30 inch Root Ball

8-foot snow blade, Spring trip, Moldboard profile, Reversible cutting edge, Lateral float, Hydraulic 35° angle, Adjustable skid shoes, 8 inches of vertical travel, universal skid steer coupler

6.5ft Power Landscape Rake & Debris Collector, universal skid steer mounting, 84" overall width, 76" working width, tills, fluffs and grooms, low maintenance rotating bi-directional steel drum with 340 teeth, tills up to 2.5" in depth, picks rocks 1" to 20" in diameter, 12.5 cu ft capacity bucket with perforated floor to sift dirt thru, 10-25gpm hydraulic requirement, hydraulic hoses & flat-face hyd couplers, 1465lb weight

HLA 72'" 4-in-1 Hydraulic Dump Loader bucket with 17.1 cu ft capacity. 33"D x 26"H. Includes 2 1/2"x 8" cylinders with Hoses.

60" plowing width, 24" high moldboard, 21" deep fixed endplates, reversible/ replaceable rubber cutting edge, hi-tensile adjustable skid shoes, universal skid steer mount, grey paint, bolt on back drag option, 574 lb weight, for machines up to 4000 lbs.

60" plowing width, 24" high moldboard, 21" deep fixed endplates, reversible/ replaceable rubber cutting edge, hi-tensile adjustable skid shoes, universal skid steer mount, grey paint, bolt on back drag option, 574 lb weight, for machines up to 4000 lbs.

60" Rotary Mower, Universal Skid Loader Quick Attach, Tail Wheel, Chain Shielding, Hoses and Flat Faced Couplers.

The Lewis Litter Blade gives the operator the ability to remove caked litter and other unwanted materials from the sidewalls and those ‘hard-to-reach’ corners of the poultry house. The Litter Blade is designed to work in both older houses with internal post supports, as well as the newer solid wall type houses. The added time savings along with the ability to clean the entire poultry house area makes the Litter Blade a must for efficient litter management. Width-9’8, Length-9', Weight-900 lbs., Extension Blade-28, Hydraulic Flow Required-10 gpm., Blade-Beveled, High Strength Steel. This was purchased new in 2019 and never used.

X-Treme Duty Skid Steer Auger Unit, universal ssl mount, pivoting cradle mount allows auger unit to stay vertical, fwd & rev rotation, 15gpm - 30gpm hyd requirement, hydraulic relief protection, sealed oil-bath planetary gear reduction, 2" hex drive to auger, 2769 ft lb max torque, 97 rpm max speed, hydraulic hoses & flat-face couplers, includes Two Auger Bits incl: 9"x4' HDF-Series Auger Bit & 30"x4' HTF-Series Tapered Tree/Shrub Auger Bit, Drive Unit Serial #402384

7' 11" wide scraper with SSL quick attach and back drag, manure scrapers are used to scrape away manure quickly and easily. Getting right down to the ground the rubber edge cleans in as little as one pass. Made of durable industrial tires and attached to a sturdy 3 1/2 x 3 1/2 x 1/4 wall structural tubing frame, our scrapers are made to last. Rubber scrapers have many advantages over traditional steel blades, Outlast steel blades, Takes vibration out, Gentle on concrete, Cleans like a squeegee, Reduce risk of injuring livestock, Rubber blade does not rust, Dipped in paint to provide additional protection from the elements, Slightly Used, 6 month old

78" Low Profile Long-Floor Dirt Bucket, universal skid steer mount, 19.1 cu ft capacity, includes secondary bolt-on reversible cutting edge, operator entry step, good condition

Brand new 84" bucket off of a New Holland Powerstar 120, Universal Skid steer quick attach, 25" high inside, 31" deep

84" bucket / Skid Loader Hook Up / New Bucket, it came off a Work Master 120 Tractor

2025 model year, V60 multi-purpose 4-in-1 bucket, 78" width with bolt-on cutting edge and side-cutters installed. Hydraulically operated.

7Ft Heavy Duty Hi-Capacity Snow-Material-Mulch Bucket, universal skid steer mount, unique 8" tall top-rear window allows visibility to cutting edge! 85.5" width, 29.8" height, 43" depth, 37.2 cu ft heaped capacity, shell built of 3/16" thick steel, 1/4" thick end plates, 3/8" thick edges & gussets, five 1/2"x4" underside wear bars, 3/4"x6" drilled cutting edge, approx 765lb weight, Serial #116619

V60-Series 8Ft Hi-Capacity Snow/Material Bucket, universal skid steer mount, 97.5" width, 40.5" height, 47.6" depth, 12" laser cut top-rear window panel, 49.4 cu ft struck capacity, 59.3 cu ft heaped capacity, built of 1/4" thick steel, 3/4"x6" welded cutting edge, also includes 5/8"x8" bolt-on reversible cutting edge, approx 1325lb weight, purchased new in 2022 and used very little = very good condition!

72" Snow / Light material bucket, 22.2 cubic foot struck, 26.6 cubic foot heaped , ¾" x 6" weld-on cutting edge with holes / Bolt on reversable cutting edge

Worksaver tree clipper. Boom mounted tree shear will cut through limbs up to 8". The tree clipper is designed to cut trees or limbs that are up to 8.0 inches in diameter. The tree clipper has a 5” bore x 8.0” stroke hydraulic cylinder to power the alloy steel shear blades. The tree clipper head is rotated with a 21/2” bore x 10” stroke hydraulic cylinder. The tree clipper is available in two models. The model TC8-FL is designed to mount on farm tractor front-end loaders. Optional brackets are available to fit most popular quick coupler front-end loaders. The model TC8-FL is recommended for tractors with a minimum PTO horsepower rating of 40 hp. Tractors need to have a minimum hydraulic pressure of 2000 PSI. The model TC8-SS is designed to mount on skid steer units equipped with the universal quick-attach bucket or attachment connection.