Used Equipment
>
Construction Equipment
>
Skid Loader & CTL Attachments
>
Virnig URG66-CT
Used VIRNIG URG66-CT
800-222-3373 | sales@messicks.com | Print Page
sales@messicks.com
Virnig V30-Series Root Rake Grapple, 67.5" overall width, 27.9" overall height, 16.6" overall depth, nine bottom tines on approx 9" spacing, built of 1/4" thick steel, dual 2"x6" hyd cylinders, 35.5" grapple opening, 320lb weight.
Virnig URG66-CT
MODEL URG66-CT
- Overall Width: 67.5 Inches
- Height: Overall / Bucket: 27.9 / 24.9 Inches
- Overall Depth: 16.6 Inches
- Number of Bottom Tines (with Sides): 9
- Space Between Tines / Bottom: 4.8 / 9.1 Inches
- Space Between Tines / Grapple Jaws: 7.0 / 9.2 Inches
- Tine Thickness: 0.25 Inches
- Cylinder Bore / Stroke: 2.0 / 6.0 Inches
- Cylinder Pins / Hinge Pins Dia: 1.0 Inches
- Grapple Jaw Opening: 35.5 Inches
- Approximate Weight: 320 Pounds
- Recommended Loader Capacity: Less than 1500 pounds
Recent Trades
Bobcat - 60
60" Bobcat V-Blade, folds back to approx 48" for side walks. Skid loader hookup with Bobcat 8-pin electrical plug. Great physical shape.
View 
Brown Welding - Post Pounder
This post driver setup has been designed especially for driving tall posts in orchards or vineyards where narrow row spacing and uneven terrain are a problem. The post driver can be carried by 3-point forks or a front lift. This allows it to be hooked up and unhooked in minutes. An adjustable bottom support gives the unit stability, allowing the operator to drive posts with the frame sitting on the ground. This frame also supports the unit when it is unhooked from the tractor. A four lever control valve allows the operator to adjust the tilt in both directions as well as 3 foot of travel side to side of the tractor. This allows the tractor driver to travel straight down the row, with less maneuvering resulting in faster post installation saving both time and money.
Features:
Impact: 30,000 lbs, Max post width: 7?, Adjustable for different post heights, Hydraulic base plate for tilt and offset, Tilt and offset: 15 degrees, Flow requirement: 3-4 GPM, 3 FT of hydraulic side travel adjustment, Adjustable support foot, Head Weight: 445 lbs.
Only used a few times, compared to new at $9,700.
View
Care Tree - Spade
Tree Spade, Skid steer mount, Adjustable Stands, Swing Door, Hydraulic Functions with Lever Controls upgraded unit with no cables!, 30 inch Root Ball
View
FFC - LAF1596
8-foot snow blade, Spring trip, Moldboard profile, Reversible cutting edge, Lateral float, Hydraulic 35° angle, Adjustable skid shoes, 8 inches of vertical travel, universal skid steer coupler
View
Hla - MB72BO500
HLA 72'" 4-in-1 Hydraulic Dump Loader bucket with 17.1 cu ft capacity. 33"D x 26"H. Includes 2 1/2"x 8" cylinders with Hoses.
View
Hla - SP350012
12 foot working width, Reversible rubber cutting edge, 38" high moldboard, 36" deep fixed end plates, Adjustable steel skid bars, Universal skid steer, Like New!!!!!
View
Hla - SP3500R12LF
12 foot working width, Reversible rubber cutting edge, 38" high moldboard, 36" deep fixed end plates, Adjustable steel skid bars, Universal skid steer, Like New!!!!!
View
Hla - SP4510
10ft HD snow pusher / trip cutting edge / metal edge / Bucket lip mounting / never used, new condition
View
