Messick rental fleet. There isn’t much that can stand up to this Crary® Bear Cat® 9 inch chipper! It’s powered by a 2.2L Kubota diesel engine. Based on a solid 4-inch “C” channel frame with torsion axle suspension, this chipper makes branches and trees up to 9 inches in diameter disappear. The CH922DH features a dynamically-balanced 30 x 1.25 inch thick rotor that weighs 275 pounds and produces tremendous chipping power. The CH922DH now features a Digital Display Controller (DDC) hydraulic feed system with a variable speed feed roller with instant reverse. The DDC features: • Movable Digital TFT screen for easy viewing, even in bright sunlight conditions • Soft key menu selection buttons for simple user navigation • Pre-programmed maintenance schedule reminders • Hydraulic system diagnostic capabilities • Troubleshooting screens to provide in-field help • Pre-programmed with English, Spanish, French, Portuguese, Norwegian, Russian and Chinese • Tested in the most extreme conditions to ensure longevity The Chippers’ hydraulic feed system is electronically controlled. If the rotor speed drops below optimal operational RPM range, the controller pauses the feed roller to allow the rotor to regain speed, and then restarts feeding once optimal rotor RPM is achieved. This AutoFeed function allows for less fatigue on wear parts and maximizes efficiency. Additional features include a 15-inch diameter feed roller containing 10 knife blades, four reversible chipping blades made from heat-treated tool steel, adjustable 4-sided anvil and an 8-inch diameter discharge chute. A triple-banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension makes towing easy. 2? coupler standard. With 18 gallons in the fuel tank, you’ll create piles of chips between refills. Engine Make: Kubota Diesel Gross HP: 35 Displacement: 2.2 Liter Starter Type: Electric Dimensions Max Chipping Capacity: 9" Chute Opening: 31" x 31" Chute Throat: 9" x 9" Rotor Size/Weight: 30" x 1.25"/275 lbs. L x W x H: 127" x 79" x 100" Chipper Chipping Blades: 4 Reversible Heat-treated Drive Type: Triple-Banded Belt Feed System: Hydraulic Auto Feed: Yes Hydraulic Controller: DDC System Weight: 2,725 lbs. Trailer: 2" Ball Wheels/Tires: ST205/75R15

Demco twin 200 gallon saddle tanks, high clearance mounts for 30" of ground clearance, John Deere tractor mounts included

Three Point Hitch Sprayer, 540 RPM PTO Drive Pump, 8' boom with 20" nozzle spacing, 60 Gallon Tank, hoses are weathered from sitting outside, pump has been stored inside.

8 horsepower Kohler engine, chipper/shredder, unit runs and operates as it should. 1 wheel needs repaired

9 foot 3 point mount blade, hydraulic angle, parking stand, bolt on cutting edge

The Land Pride RB2684 Landscape Blade is a 84” wide, weighs 396 lbs. and is suitable for 25 to 60 hp tractors with Cat. 1 Hitches. It offers precise blade control with angles 7 positions forward up to 45-degrees and 3 positions reverse up to 30-degrees, along with a 12-inch left or right offset, and 5 tilt positions up to 30-degrees. This durable rake features a 17-1/2” high x 5/16” thick moldboard, and a ½” x 6” heat-treated, reversible, and replaceable cutting edge. The quick hitch adaptability and parking stand makes storage and transport easy. The RB2684 is an excellent choice for leveling, finish grading, and backfilling applications.

Used 58" Tiller. For 20-50Hp tractors. Forward rotation. Everything straight. PTO shaft complete. Compare to $3450 new.

RTR-Series Reverse Rotation Tiller, 74" tilling width, 80-1/4" overall width, 6.5" max tilling depth, 36 blades on 7-7/8" flange mount spacing, seven skid shoe depth settings, rated for 25-60hp tractors, 540rpm pto drive with slip clutch protection, weighs 521 lb.

42" - 2200 Pound Compact Pallet Forks, Backrest flush with tines to help keep load secure, 1.19" thick x 3" wide forks, adjustable fork spacing, universal skid loader quick attach, unit weighs 265 pounds

Chipper trailer that is designed with a 4-inch capacity that offers the ability to easily haul your equipment with you where needed. When looking at this unit it has a 389cc Honda GX390 for power on the go that offers the power you need to quickly tackle the job. Features: Torflex suspension axle, Highway towable, Honda GX engine, Reversible chipping blades, Self-feeding hopper, Electric start, Oversized heavy-duty rotor, 360 Degree adjustable chute, compare to new at over $13,000.00!

84" 3-Point Hitch Rear Blade, 84" Wide Moldboard 1/4" Thick With Bolt On Cutting Edge, Cat II Pins, Angle, Tilt, And Offset, Reversible

88" Wide heavy duty rototiller / 540 rpm gearbox / 3 point hitch mounting / slip clutch on PTO shaft / parking stands