(15 minutes)
Breaking loose the 'head' on cylinders is the hardest part. Large HF adjustable wrench just rounded corners, so had to resort to 24" pipe wrench with cheater extension. Do this installed on loader. Remove seals from one cylinder at a time, keeping the other as an installation reference. PDF of seal kit is poor / had to resort to measurements listed and cryptic descriptions like 'three piece seal' for individual parts to verify which kit I needed. No consistency of dimensions from one kit listing to another (some parts have dimensions, some don't) so difficult to differentiate between kits. Once correct kit identified, and 'head' broken loose though......piece of cake. Works great. No leaks now.
2/3/2022 ALEDO, TX HAL
Unrated
(45 minutes)
all parts were correct and fit as they should. set everything out prior to repair. took pictures for reference. easy
Breaking loose the 'head' on cylinders is the hardest part. Large HF adjustable wrench just rounded corners, so had to resort to 24" pipe wrench with cheater extension. Do this installed on loader. Remove seals from one cylinder at a time, keeping the other as an installation reference. PDF of seal kit is poor / had to resort to measurements listed and cryptic descriptions like 'three piece seal' for individual parts to verify which kit I needed. No consistency of dimensions from one kit listing to another (some parts have dimensions, some don't) so difficult to differentiate between kits. Once correct kit identified, and 'head' broken loose though......piece of cake. Works great. No leaks now.
ALEDO, TX
HAL