Filters (0)

Messick rental fleet. There isn’t much that can stand up to this Crary® Bear Cat® 9 inch chipper! It’s powered by a 2.2L Kubota diesel engine. Based on a solid 4-inch “C” channel frame with torsion axle suspension, this chipper makes branches and trees up to 9 inches in diameter disappear. The CH922DH features a dynamically-balanced 30 x 1.25 inch thick rotor that weighs 275 pounds and produces tremendous chipping power. The CH922DH now features a Digital Display Controller (DDC) hydraulic feed system with a variable speed feed roller with instant reverse. The DDC features: • Movable Digital TFT screen for easy viewing, even in bright sunlight conditions • Soft key menu selection buttons for simple user navigation • Pre-programmed maintenance schedule reminders • Hydraulic system diagnostic capabilities • Troubleshooting screens to provide in-field help • Pre-programmed with English, Spanish, French, Portuguese, Norwegian, Russian and Chinese • Tested in the most extreme conditions to ensure longevity The Chippers’ hydraulic feed system is electronically controlled. If the rotor speed drops below optimal operational RPM range, the controller pauses the feed roller to allow the rotor to regain speed, and then restarts feeding once optimal rotor RPM is achieved. This AutoFeed function allows for less fatigue on wear parts and maximizes efficiency. Additional features include a 15-inch diameter feed roller containing 10 knife blades, four reversible chipping blades made from heat-treated tool steel, adjustable 4-sided anvil and an 8-inch diameter discharge chute. A triple-banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension makes towing easy. 2? coupler standard. With 18 gallons in the fuel tank, you’ll create piles of chips between refills. Engine Make: Kubota Diesel Gross HP: 35 Displacement: 2.2 Liter Starter Type: Electric Dimensions Max Chipping Capacity: 9" Chute Opening: 31" x 31" Chute Throat: 9" x 9" Rotor Size/Weight: 30" x 1.25"/275 lbs. L x W x H: 127" x 79" x 100" Chipper Chipping Blades: 4 Reversible Heat-treated Drive Type: Triple-Banded Belt Feed System: Hydraulic Auto Feed: Yes Hydraulic Controller: DDC System Weight: 2,725 lbs. Trailer: 2" Ball Wheels/Tires: ST205/75R15

BMC1200 Twin Disc Fertilizer Spreader Implement, category I three-point hitch mount, 540rpm PTO drive, hopper extension kit installed, includes hopper tarp cover, stainless steel tank & impellers, designed for distribution at release of granulated or calcareous powder fertilizers and seeds in general with absolute precision

96" Red Box Blade, Medium Duty, 6 Scarifiers, 3-Point, 1/2" x 6" Cutting Edge, 790 lbs

Plastic Mulch Layer & Bed Shaper, 4' – 5' wide mulch/bed, Two drip tape attachments: lay plastic mulch and run drip tape into bed, recommended for tractors of 45HP or more.

40' Sprayer, Manual Fold Boom, 210 Gallon Tank, 3-Point, Manual Controls

48" Pallet Forks, 4200 lb rated, walk thru design, 1-3/8" thick x 4" wide forks, universal skidloader quick attach, unit weighs approx. 425 pounds, Limisted supply - List $1,322.00

500 Gallon 3 Point HD Sprayer, CAT III Hitch, 60' Air-Ride Boom, 60' Hydraulic Fold & Lift Boom, Iva 6 Section Electric Controller, 15" Nozzle Spacing, Stainless Steel Boom Lines, Red AIXR Air Inducted Nozzles, ACE 150 Hydraulic Centrifugal Product Pump, 2" Quick Fill, 15 Gallon Rinse Tank with Tank Rinse Nozzle, 5 Gallon Chemical Inductor, Power Wash with 25' of Hose, Field and Road & Boom Lights, 4 Sets of Hydraulic Remotes Needed

9 foot 3 point mount blade, hydraulic angle, parking stand, bolt on cutting edge

The Land Pride RB2684 Landscape Blade is a 84” wide, weighs 396 lbs. and is suitable for 25 to 60 hp tractors with Cat. 1 Hitches. It offers precise blade control with angles 7 positions forward up to 45-degrees and 3 positions reverse up to 30-degrees, along with a 12-inch left or right offset, and 5 tilt positions up to 30-degrees. This durable rake features a 17-1/2” high x 5/16” thick moldboard, and a ½” x 6” heat-treated, reversible, and replaceable cutting edge. The quick hitch adaptability and parking stand makes storage and transport easy. The RB2684 is an excellent choice for leveling, finish grading, and backfilling applications.

42" - 2200 Pound Compact Pallet Forks, Backrest flush with tines to help keep load secure, 1.19" thick x 3" wide forks, adjustable fork spacing, universal skid loader quick attach, unit weighs 265 pounds

Chipper trailer that is designed with a 4-inch capacity that offers the ability to easily haul your equipment with you where needed. When looking at this unit it has a 389cc Honda GX390 for power on the go that offers the power you need to quickly tackle the job. Features: Torflex suspension axle, Highway towable, Honda GX engine, Reversible chipping blades, Self-feeding hopper, Electric start, Oversized heavy-duty rotor, 360 Degree adjustable chute, compare to new at over $13,000.00!

95" Extra Heavy Duty Rear Blade, 17" Moldboard, Angling up to 60° forward and 30° reverse, Offset up to 24" left or right, Up to 30° Tilt Adjustment, 1/2" x 6" Cutting Edge, Cat II 3-Point ASABE QH Compatible, for tractors 50-100 hp, Parking Stand

84" 3-Point Hitch Rear Blade, 84" Wide Moldboard 1/4" Thick With Bolt On Cutting Edge, Cat II Pins, Angle, Tilt, And Offset, Reversible